Enter your keyword

Mason Jar Lid Coaster Tutorial

Mason Jar Lid Coaster Tutorial

I’ve been busy crafting in the kitchen again this week.  With Mother Nature getting a bit cranky this time of year, I avoid her bitter blasts of cold by huddling in my kitchen with craft projects as much as I can!

Mason Jar CraftThis week’s project was something I’ve been wanting to try ever since our family trip to Maine this past summer.  While we strolled through the quaint shops of Bar Harbor one afternoon, I saw a set of adorable coasters made using mason jar lids with a bit of cork on the bottom.  “Hmm . . .” I though to myself, “I’ll bet those would be pretty easy to make at home.”

Fast forward a few months, and you find me surfing the Internet a few weeks ago, looking for tutorials on crafting some mason jar lid coasters.  I found this stamped coaster design on a wedding site, and another coaster tutorial using heat transfer vinyl letters.  Along the way, I also found a lot of general coaster tutorials, including this one for simple fabric coasters put together using tiles and Mod Podge.

I happen to have quite a few fabric scraps left from the cloth napkins I made last year, so I though it might be fun to combine all these different coaster ideas and create a set of mason jar lid coasters that were lined with fabric.

I had most of the supplies I needed on hand already, so after a quick order from Amazon to get some cork circles and wide-mouth mason jar lids, I was ready to get crafting.

This project was fairly easy to put together, but it did take a bit of time to do all the Mod Podge layers that make the fabric waterproof. I’d recommend tackling this project on a day when you have a few household chores to get done:  You can get your craft started and then tick off a few chores during each 20 minute interval while your Mod Podge dries!

In the end, I created eight coasters and absolutely loved the way they turned out!  I have fond memories of many childhood trips to my grandparents’ farm, and these coasters stir up that farmhouse nostalgia with their simple charm.

Want to give these coasters a try for your own home?  Or maybe you’re just looking for a sweet, homemade gift to make for a friend?  Grab the following supplies and check out the instructions below, and enjoy some creative time putting your own mason jar lid coasters together!

Supplies:

How To Make:

*Please note that steps 5-7 are optional.  I wanted my fabric to show on the bottom of my coaster as well as the top so that I could flip my coasters over for wider-based coffee mugs that wouldn’t fit inside the lid. (We drink a lot of coffee around here, what can I say?)  I also wanted to make sure the bases were extra sturdy so they could be used either way.  In order to accomplish this, I added these steps

Step 1: Remove a lid from the wide-mouth mason jar.  Trace this lid onto all of your cork pieces.

Step 2: Cut out the cork circles.

Step 3: Using the same jar lid, trace circles onto your fabric.  You will need one fabric circle per coaster.  (*If you do optional steps 5-7, you will need to do two circles per coaster.)

Step 4: Cut out your fabric circles using a sharp scissors.

Step 5 OPTIONAL: Apply a layer of Mod Podge to the back side of your jar lid. (The non-shiny side.)  Press the cork board on top.

Step 6 OPTIONAL: Apply a layer of Mod Podge to the other side of the jar lid. (The shiny side.)  Press a fabric circle to this side.  Allow 15 minutes for both sides of the jar lid to dry.

Step 7 OPTIONAL:  Apply additional layer of Mod Podge to the top of your fabric (on the lid).  Allow 15-20 minutes to dry.

 

Step 8: Apply a layer of Mod Podge to the top side of your cork circle.  Place a fabric circle on top and press in place.  Allow 10-15 minutes to dry.

Step 9: Apply a layer of Mod Podge on top of the fabric that’s now covering your cork.  Allow 15-20 minutes to dry.

Step 10: Apply additional layer of Mod Podge to the fabric on top of your cork. (no picture. See Step 9 image.)

Step 11: Gather the metal jar rings.  Using craft glue or a hot glue gun, apply a layer of glue around the inside edge of each jar ring.  Press the fabric-covered cork piece down into the ring and allow time for glue to dry.

Once you’ve finished all that mod podging and gluing, I’d recommend giving your coasters about a week to dry really well before actually using them.  In some tutorials, I also heard of people adding a coat of varnish at the end, to avoid any stickiness from the Mod Podge.  (I opted to skip that step, and I do occasionally have my glass stick a bit to the coaster, but it’s not really a big deal to me, so I didn’t mess with the varnish.)

I hope you enjoy this coaster project!  When it’s all done, you can kick your feet up and enjoy a glass of your favorite beverage while you enjoy your handiwork. Happy crafting!

Mason Jar Craft

Comments (11)

  1. Avatar

    These look really cute and fun to make. Did you used a second cork on the top side to absorb moisture or do you just used the top for coffee cup, ie warm drinks?

    Feb 26, 2019 Reply
    • Avatar

      I just used one cork. So there’s one side with fabric over cork. (The side facing up from “in” the coaster) And the flip side has the fabric over the metal lid cover. (This is the side on the “bottom” of the coaster) I mostly set mugs/glasses in the lid. But I do have a few wider mugs that I will occasionally flip the coaster lid over and set on top: I haven’t had moisture problems either way. Another option would be to just skip using the metal lid altogether (skip steps 5-7), but still add fabric to BOTH sides of your cork so you see the design either way. The only drawback there might be that your coaster won’t be quite as sturdy with just cork in the center. Hopefully this all makes some sense. (Some things are just hard to explain on a blog!)

      amyjoy
      Feb 26, 2019 Reply
  2. Avatar

    Could you put a piece of insulbrite between fabric and cork and it would add protection from hot mugs.

    Donna
    May 14, 2019 Reply
    • Avatar

      I haven’t worked with insulbrite before, but I would imagine that would work fine. There should be room in the lid for all the layers. Hope your project works out well! 🙂

      amyjoy
      May 14, 2019 Reply
  3. Avatar

    can you show a picture of the bottom of the coaster?

    kay duffy
    Oct 18, 2019 Reply
    • Avatar

      I will try to get a picture of the bottom up soon, but for now let me give you a quick description: The bottom of my coasters looks exactly like the top. You see the fabric that’s covering the lid section, and then the ring around it. (If you opt NOT to put fabric on the back side, you’ll just see the plain metal lid, which works just fine too.)

      amyjoy
      Oct 22, 2019 Reply
  4. […] Found at More Like Grace […]

  5. […] Mason jar lids (Check out More Like Grace for the full scoop on these adorable coasters!) […]

  6. Avatar

    This is best instruction I ever had on a project. Awesome . Great perfect . Going to make some as a gift.

    Jo patrick
    Jul 16, 2020 Reply
  7. […] using a Mason jar, you can also salvage their lids to make some really cool drink coasters. This tutorial that features a bit of cork in the bottom of the lids lets your customers settle down and get […]

  8. […] you’ll be able to additionally salvage their lids to make some actually cool drink coasters. This educational that includes a little bit of cork within the backside of the lids shall we your shoppers relax and […]

Leave a Reply to amyjoy Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.